METALPRESS 150

• Electric control board complete with electronic PLC.
• Guide sleeve and punch K100 so as to work at very high pressure.
• Precompressing box cylinder.
• Movable door (bulkhead) apt to press small quantities of very fine material.
• Chip‘s container Ø 1000.
• Production 50-150 Kg./H. This detail is unbinding and depends on the specific weight and consistency of the material
• Motor pump (HP 10)
• Press power about 1000-1250 Kg./cm2.
• Briquette cylinder Ø 150mm.
• Box cylinder Ø 50mm.
• Bulkhead cylinder Ø 50mm.
• Briquette Ø 60 mm.
• Standard working pressure 150-200 bar.
• Power device for motor power.
• Thermofeeler for oil temperature.
• Closed circuit cooling system (air/oil).
• Volume reduction 1x4, 1x10 according to the specific weight of the material.
• Dimensions: W 1770 mm x L 1250 mm x H 1485
• Weight: 1100 kg.

METALPRESS 400

• Electric control board complete with electronic PLC.
• Guide sleeve and punch K100 so as to work at very high pressure.
• Movable door (bulkhead) apt to press small quantities of very fine material.
• Chip‘s container Ø1200.
• Production 100-400 Kg./H. This detail is unbinding and depends on the specific weight and consistency of the material
• Motor pump (HP 12,5)
• Press power about 1500-1800 Kg./cm2.
• Briquette cylinder Ø 190mm.
• Bulkhead cylinder Ø 80mm.
• Briquette Ø 70 mm.
• Standard working pressure 200-250 bar.
• Power device for motor power.
• Thermofeeler for oil temperature.
• Reducer for feeding process.
• Closed circuit cooling system (air/oil).
• Volume reduction 1x4, 1x10 according to the specific weight of the material.
• Dimensions: W 2000 mm x L 1370 mm x H 1500
• Weight: 1400 kg.

METALPRESS 800

• Electric control board complete with electronic PLC with amplified connectors.
• Guide sleeve and punch K100 so as to work at very high pressure.
• Movable door (bulkhead) apt to press small quantities of very fine material.
• Chip‘s container Ø1200.
• Production 300-800 Kg./H. This detail is unbinding and depends on the specific weight and consistency of the material
• No. 2 motors pump (2x HP 20)
• Press power about 1800-2300 Kg./cm2.
• Briquette cylinder Ø 250mm.
• Bulkhead cylinder Ø 100mm.
• Briquette Ø 80 mm.
• Standard working pressure 200-250 bar.
• No. 2 power devices for motor power.
• Thermofeeler for oil temperature.
• Closed circuit cooling system (air) with pump.
• Antifreezing system.
• Volume reduction 1x4, 1x10 according to the specific weight of the material
• Dimensions: W 2900 mm x L 1680 mm x H 1650
• Weight: 3800 kg.