METAL CHIP AND SCRAP HANDLING |
 |
|
LANNER® chip crushers are suitable for breaking up steel wool, stainless steel, titanium, aluminium, brass and cast chips that are high in oil content. The broken, free flowing chips achieve around 20% of their original volume depending on the type of material.
Chips from high-alloyed or rough materials are not a problem for our chip crushers. The robust design of the electromechanical motor means you can apply ideal crushing parameters. You have the option of a hydraulic motor for chips with a high percentage of bulk. Added bulk such as rods or turned parts are removed from the crushing area by automatic bulk separators. If bulk like this does end up in the crushing funnel, the motor switches itself off. Then a part of the crushing wall opens. A quick reversal of the knife head sends some of the already crushed chips and the bulk part out through the open hatch. Then the hatch closes and the crusher starts up again.
SANT'ANDREA NOVARA Industrial shredder Serie G are composed by an hopper, a shredding group with two slow shafts, an unloading device and an electric drive. Machines are controlled by a PLC and an automatic reversion system in case of overload.
SANT'ANDREA NOVARA Industrial shredder Serie H are composed by a shredding group with two slow shafts and an oleodynamic drive. Loading and unloading systems are fully personalized. The automatic reversion system in case of overload is done by a pressure switch.
Detailed description...
|
|
|
The new type of briquetting presses particularly rich of highly reliable technological elements, is at the top of CO.MA.FER. technology thanks to more than 25 years experience.
The advantages to press different ferrous and non-ferrous materials like aluminium, bronze, copper, lead, cast iron, inox, titanium, magnesium, polishing powders,.. are:
• Volume reduction up to 1:10 times in order to improve freight and packing costs
• Increase melting yield
• During the compression oil and chemical waters are separated so as to recover up to 95%
• Very fine powders are compacted
• Reduce area requirement for chip storage
Detailed description...
|
|
|
In the centrifugal drum there is a hydraulically activated sliding floor which moves in an upwards and rotational direction. The continuously fed materials
first fall through the inlet funnel into the drum and land in a circle around the base of the drum wall.
The programmed sliding floor pushes the material in set cycles through the specifically designed
bar screen integrated into the drum wall.At this point the material is separated into solids and fluids. The dried material is
carried over the edge of the drum by the upwards push, bounces off the oil scraper ring on the housing wall and exits the centrifuge down through the tapered chip ejection funnel.
The projected fluid flows off to the side along the fixed retaining wall down the diagonally placed outlet gulley under the drum into the adjacent holding tank. Subsequent material and the
constant outwards motion of the sliding floor prevents the bar screen from sticking or getting blocked. The centrifuge's self-cleaning concept reduces cleaning work to the absolute minimum.
Detailed description...
|
|
|
Complete chip treatment systems, built according to your requirements. LANNER® customised systems are available as a complete solution.
The LANNER®-Recycling-Concept:
Our systems can process different types of chip, silt and metalworking fluids with maximum separation.
• Complete solution system concept separating oil from metal chips and silt.
• Chips are fed into the lift & tip machine from the chip transporter.
• Chips are tipped into the chip crusher.
• Chips are transported into the centrifuge on the conveyor belt.
• Dry chips are ejected into containers or silos.
• The entire system is controlled automatically from a central control box.
Detailed description...
|
|
AIR AND COOLANT FILTRATION |
 |
|
The Losma Liquid Filtration Range is made up of various types of filter to cope with all eventualities. Losma’s expertise in this area shows in all its products, from the simplest of cloth filters to more complex integrated systems with several filtration stages. This know-how also means that tailor-made solutions and one-off designs can be proposed for special customer requirements. The Liquid Filtration Range comprises seven product lines, DETEX, DEMAG, DECOM, RIVER, SKIM; SPRING and MASTER Series which can all be equipped with refrigeration systems to order.
Detailed description...
|
|
|
For the air cleaning LOSMA offer many different models of mist collectors: centrifugal (in the versions turbine, single centrifuge and double centrifuge), static filters and specific units for very high throughputs or centralized systems. All the models are ready for being arranged with a range width of modules of pre and after-filtration therefore to resolve in specific way any type of problem. Our mist collectors can be directly installed on the machine tools. They remove the polluting from the source, and can easy be moved, and used again on other machines or switched off in case they are not used.
Detailed description...
|
|
|
The objective of a dust filter is to get rid of unhealthy particles. For the best possible result, we use a HEPA-filter as the final filter step. With that, the air usually becomes so clean that it can be returned to the premises.
Absolent is the only dust filter producer that utilizes the “down flow” technique to the full.
Absolent’s filter cartridges can be washed, which contributes to an unbeatably low total cost of ownership. The filter cartridge have a normal life span of 2-4 years before they have to be exchanged.
Oil smoke filter has been designed to guarantee more than 99.9% separation of particles down to 0.3µm. The separating efficiency remains constant and does not deteriorate over time.
Absolent’s oil-smoke filter requires very little service: it can run for 1-6 years without requiring a filter change.
|
|
PROCESS WATER ENGINEERING |
 |
|
VACUDEST® vacuum distillation plants are processing your process and waste water ingeniously simple, reliable and at reasonable cost.
The water evaporates under vacuum and the resulting condensation feeds all energy back into the system. Thus the vacuum pump
is the only energy consumer. The plant operates at minimum cost and the treated distillate can be recycled. The pollutants
in the process and waste water are concentrated to a maximum level and can be reused or disposed of. Due to the dramatic
reduction of the energy input and the low operating costs, the investment in the VACUDEST® system is recovered quickly.
Detailed description...
|
|
|
|
Home